Fiber laser cutter China
fiber laser cutting machine
Trois types de relations de mise au point de la machine de découpe laser

Trois types de relations de mise au point de la machine de découpe laser

03 Apr,2023

1. Cutting focus on the workpiece In this way we also become negative focal length, because the cutting point is not located on the surface of the cutting material or inside the cutting material, but is positioned above the cutting material. This method is mainly used with materials with high cutting thickness. In this way, the focus is on the cutting material above, mainly because the thick plate needs a large cut, otherwise the nozzle transport oxygen is very easy to appear caused by insufficient resulting in lower cutting temperature.

Voir plus+

Causes et solutions de l'instabilité de l'arc de la machine de découpe plasma

Causes et solutions de l'instabilité de l'arc de la machine de découpe plasma

03 Apr,2023

Causes et solutions de l'instabilité de l'arc de la machine de découpe plasma :

Voir plus+

Comment gérer la table de travail à eau rouillée pour la coupe du métal ?

Comment gérer la table de travail à eau rouillée pour la coupe du métal ?

03 Apr,2023

Comment gérer la table de travail à eau rouillée pour la coupe du métal

Voir plus+

Machine de découpe plasma CNC Honeybee, âgée de dix ans

Machine de découpe plasma CNC Honeybee, âgée de dix ans

03 Apr,2023

Ten years old Honeybee CNC plasma cutting machine

Voir plus+

Quatre façons de résoudre la surbrûlure lors de la découpe laser

Quatre façons de résoudre la surbrûlure lors de la découpe laser

02 Apr,2023

Comment éviter les brûlures excessives lors de la découpe laser de tôles ? 1. Add cooling point at the corner When cutting metal plate with sharp corners, the position where overburning is more likely to occur is often at the sharp corners. Overburning will cut the sharp corners into round shapes. At this time, you can add a cooling point at the sharp corners, pause at the sharp corners and blow air.

Voir plus+

How to protect laser in summer? Let’s see what I can do

How to protect laser in summer? Let’s see what I can do

02 Apr,2023

When summer comes, the temperature rises and the rainfall is frequent. At the same time, we also remind you to give the laser cutting machine a suitable environment to spend the continuous rainy season and hot days. When the laser cooling water temperature is set lower than the dew point temperature, condensation is likely to occur. Condensation will damage the electrical and optical components of the laser, and even cause the component failure. In order to avoid condensation, the environmental conditions of the laser must be within a certain limit.

Voir plus+

< 1...161718...20 >